TATTOO MACHINE, IRON WALKER STYLE CUTBACK LINER "FAST"
Health and Beauty :: Tattoos, Body Art :: Tattoo Machines, Guns
TATTOO MACHINE, IRON WALKER STYLE CUTBACK LINER "FAST"BY ME SCOTT HEPWORTH, 142Hz, @ 5 VOLTS "A MUST HAVE"
THIS IS A IRON WALKER STYLE CUTBACK LINER SIGNED AND BUILT BY ME SCOTT HEPWORTH. THIS MACHINE HAS AN IRON FRAME AND, IT HAS BEEN DRILLED, AND HEAT COLORED THEN CURED IN OIL TO PROTECT IT FROM RUST, HEAT TREATED 1.250-5/16 WITH A 7/16 TOP LOW CARBON HIGH IRON (99.6%) THEY ARE WRAPPED 8 TIMES WITH 24 AWG BELDEN MAGNET WIRE WHICH WORKS UP TO 750F UNLIKE COTTEN OR SILK, AND BACKED WITH KAPTON FILM WHICH WORKS UP TO 350F BEFORE IT MELTS SO THIS MACHINE WILL NEVER HEAT UP "EVER" I WRAPPED THE COILS IN PART OF $1 THEN SHRINK WRAPPED THEM, 18G SPRINGS, IT HAS A PURE IRON "A" BAR HITS AND SOUNDS BEAUTIFUL, 22UF-35V NICHICON CAPACITOR, AND TO TOP IT OFF BLACK IRON BINDERS AND A COPPER CONTACT. I HAVE BEEN A TATTOOER FOR 13 YEARS, AND BEEN PLAYING WITH MACHINES FROM THE START. I HAVE OWNED THE "SO CALLED" FINEST MACHINES FROM THE LARGEST NAMES IN THE BIZ, BUT ALWAYS HAD TO TWEAK OR REBUILD THEM AND DONE SO FOR OTHERS, SO NOW I AM BUILDING MY OWN WITH THE BEST MATERIALS MONEY CAN BUY AND NOW OFFERING YOU ARTISTS OUT THERE A CHANCE TO OWN A MACHINE THAT WORKS FOR YOU AND NOT AGAINST YOU. JUST CHECK OUT MY FEEDBACK FOR SOME REASON PEOPLE BUY MORE THAN ONE ? THIS IS A LINER HAS A LONG THROW AND A NICE HIT TO IT, IT HAS AN ANGLED REAR DECK SO THE A BAR HITS FLUSH ON THE FRONT WITH A HAIR GAP UNDER THE REAR, IF YOU CANT PUT CRISP CLEAN LINES IN WITH THIS MACHINE YOU CANT TATTOO!!! STATS "UNLOADED" ARE 142HZ @ 5 VOLTS 56% DUTY 0STL, AND YOU CANT STOP IT WITH YOUR FINGER THIS WILL GREAT FOR 3,5,7S LINERS. HERE IS THE DEAL WITH THESE MACHINES I HAVE BEEN PUTTING UP I HAVE NOT SPENT HOURS AND HOURS FINISHING THE FRAMES OFF MIRROR POLISHING THEM CARVING THEM UP AND ALL THAT JAZZ, SO YOU ARE GETTING A TOP CLASS HAND BUILT AND TUNED MACHINE BY ME FOR LESS $$$ SHIPPING, MY MACHINES HAVE BEEN GOING TO AUSTRALIA, ICELAND, SWEDEN, CANADA AND ENGLAND AND FRANCE, IT COST'S ABOUT $13-$20 AND THEY GOT THEM IN ABOUT TEN DAYS OR SO DEPENDING ON CUSTOMS THEN IT MAKE TAKE AS LONG AS 3 TO 4 WEEKS. US SHIPPING IS ABOUT $4.60 TO $5.20 FEEL FREE TO CONTACT ME IF YOU HAVE ANY ? I WILL HELP ALL I CAN. MY MACHINES GUARANTEED FOR LIFE BARRING ANY "ABUSE" OR MODIFICATION. | ||||||||||||
Home
Site map