|
Place a bid
WELCOME TO OUR STORE! WE SELL THE LAST INNOVATIONS IN THE BEAUTY INDUSTRY. FEEL FREE TO ASK ANY QUESTION ABOUT THE EQUIPMENT AND TREATMENTS. THANK YOU FOR VISIT!
Diamond microdermabrasion : safe, simple and effective!!!
Two effective additional treatments - hot and cold hammer to calm the skin and ultrasound probes for the massage.
You invest in your beauty - amazing and lasting results.
This unit is a small skin care station - great for home use as an alternative to the most agressive micro-crystal salon treatment.
It uses different size diamond heads for different body areas.
I recommend this device for home use - it is easy to look younger!!
Diamond microdermabrasion is mechanical peeling which removes the upper layer of dead cells. This will help to improve the skins condition by smoothing small wrinkles and bring out a glow to the skin.
Visible skin improvements are usually apparent after only a few treatments.
38cm*37cm*30cm
Power: 110 Volt / 50-60 Hz / 45 Watt
Complete manual included
LEARN MORE ABOUT THIS DEVICE AND CHECK MY GUIDES WITH THE FULL DESCRIPTION OF THE TREATMENT AND MORE PICTURES. (Go to my e-bay seller page "sunset_rose_2008" and look at my Reviews and Guides section. Or contact me with any question you may have.)
USER GUIDE
Introduction
Diamond Dermabrasion – the cosmetology treatment which uses a diamond head wand with different size tips. Natural or synthetic diamond chips polish the skin, removes dead cells and then vacuums them into the waste filter. The removed layer consists only of the dead cells which are bonded together (about 10-15 microns). This treatment is the safest rejuvenation procedure to date. These beneficial results may be:
- Improvement of acne-prone or blotchy skin
- Removal or fine scars and wrinkles
- Reducing or removal of milia (also known as milk spots or oil seeds)
- Reducing sebaceous hyperplasia and enlarged pores
- Improved texture of sun-damaged or uneven skin
Ultrasound massage - successfully calms the skin after the dermabrasion treatment using the sound waves with a frequency of 1MHz which penetrate approximately 4” beneath the skin. These beneficial results may be:
- Stimulates the regeneration of the skin
- Increase in the blood flow to and in those treated area which helps speeds up the healing process
- Reduces swelling and edema
- Improved permeability (the process known as phonophoresis)
Frequently Asked Questions
Q: Are there any side effects with diamond dermabrasion?
A: Cosmetologists and clients agree that diamond microdermabrasion has very few side effects. They may be; temporary discoloration of the treated area, sensitivity to UV-UA rays or redness. These are a normal reaction which will disappears after a few hours.
Q: Can I see the difference after the first diamond microdermabrasion treatment?
A: Yes. You can see results after the first treatment however the best and most permanent results are obtained after a minimum of 6 and up to 12 sessions depending on the skin condition.
Q: Can the diamond dermabrasion restore the skin complexion?
A: Yes. The exfoliation of the dead skin cells stimulates collagen production essential to healthy skin and evens out skin texture and tone.
Q: Is diamond microdermabrasion just as effective for men as it is for women?
A: Yes. It is just as effective for men as it is for women. The treatment removes the upper layer of the skin which consists of dead sells, stimulates collagen production and removes fine lines and wrinkles.
Q: Can diamond dermabrasion remove or diminish stretch marks?
A: Yes. By removing the upper skin layer the microdermabrasion treatment evens skin tone and can reduce or even totally remove streatchmarks.
Q: Does it work for the pimple scars?
A: The diamond dermabrasion can remove the superficial pimple scars. Deeper scars need more invasive techniques as laser resurfacing or deep chemical peeling.
OPERATING GUIDE
Controls:
(1) Power Button
(2) Wand socket
(3) Dermabrasion vacuum pump output
(4) Vacuum pump intensity knob
(5) Vaccum meter
(6) Hot & Cold Hammer On/Off Button
(7) Hot & Cold Hammer output
(8) Ultrasonic probe output
(9) Ultrasonic On/Off
(10) Ultrasonic wave mode change
(11) Ultrasonic Hold/Resume Button
(12) Ultrasonic intensity level
Attachments:
(a) Stainless steel dermabrasion wands - 3-pc
(b) Stainless sleel diamond chip coated tips - 9-pc
(c) Silicon hose for the vacuum pump (not shown)
(d) Cotton waste filters (not shown)
(e) Cold & Hot Hammer
(f) Ultrasonic eye probe
(g) Ultrasonic face probe
Connect the silicon hose (c) to the vacuum pump output (3).
Connect the other end of the silicon hose to the stainless steel wand (1)
Connect the diamond dermabrasion tip of your choice. Use the smaller ones for delicate areas.
Turn on the POWER button (1). The vacuum pump will start.
Adjust the intensity of the vacuum to the desired level using the vaccum pump intensity knob (4)
Choose the proper ultrasonic probe and insert the plug into the output (8). Adjust the wave mode (10). Turn on the ON/Off button (9)
Adjust the intensity level (12). To verify the ultrasound is working place a drop of water on the face of the probe. The water should begin to "boil".
Insert the plug of the Hot & Cold Hammer into output (7). Turn on the Hot & Cold On/Off Button (6).
In approximately 3 minutes the surfaces will reach their proper temperature. You can regulate the intensity of the Cold and Hot treatment using the switch on the handle. The treatment will help to calm the skin and train the pores which helps to diminish their size.
PAYMENT POLICY:
**Payment must be received within 5 days of auctions closing date. Any unpaid orders will be cancelled without prior notification.
**All non-paying bidders will receive a non-paying bidder alert and negative feedback.
**By bidding on our merchandise you agree and certify that you have read, understand, accept and agree to all terms of this action.
SALES TAX:
Florida sales taxes are charged as per the county shipment is to be received. All other purchasers outside of Florida are responsible for paying the appropriate sales tax in your state. We will accept Tax Exempt forms at the time of purchase. Tax Exempt forms must faxed within 24 hours of the sale.
SHIPPING AND PROCESSING:
Orders are typically processed within 1-2 business days unless otherwise specified or requested. If payment is to be made by either Certified Check or Money Order please allow 7-10 business days for these funds to clear. Shipping costs and times vary depending on the destiination and mechardise ordered. We do allow for FedEx and UPS pick-up should the purchaser wish to utilize their own account.
At this time we are shipping only to Canada nd in the United States.
RETURNS AND EXCHANGES:
We offer a complete 100% money back guarantee for defective items. Defective items or missing parts must be reported within 7 days of delivery. If your package(s) are delivered in an unfit (damaged shipping container or box) condition, please do not accept shipment but rather note with the shipper that you are refusing the shipment due to damage and then contact up within the next 24 hours. Returns and exchanges for any other reason will be accepted within 7 days of purchase. Due to the varying sizes of our equipment all returns and exchanges for non defective reasons are subject to a 30% restocking fee and must be in it's original condition and packaging. Buyers are responsible for all shipping and insurance cost for return shipments. Purchaser must provide adequate insurance to cover the original purchase price when returning merchandise.
|